Air Intake And Exhaust System/Turbocharger Failure Analysis TURBOCHARGER FAILURE ANALYSIS The following is a guide for diagnosing the cause of turbocharger failures after removal from the engine. COMPRESSOR HOUSING INLET DEFECTS Problem Possible Cause Suggested Remedy Foreign Object Damage Objects left in intake Disassemble and inspect intake system for system. foreign objects (this group). Inspect engine for internal damage. Leaking and/or defective Inspect air intake system connections including intake system. air filter; repair as required (this group). Inspect air intake related engine components. Compressor Wheel Rub Bearing failure.
Determine if engine and/or operator contributed to lack of lubrication, contaminated lubrication, excessive temperature, or debris generating engine failure in progress. Correct as required. Manufacturing defects. Correct as required. COMPRESSOR HOUSING OUTLET DEFECTS Oil and/or Dirt in Housing Restricted air intake system. Inspect and clean air cleaner. Prolonged periods of low RPM Check with operator to confirm conditions. engine idling. (See Operators manual.) Defective oil seal ring. Repair as required. (This group.) Restricted oil drain line. Inspect and clear oil drain line as required. TURBINE HOUSING INLET DEFECTS Oil in Housing Internal engine failure.
Inspect and repair engine as required. 30 8 Oil leaking from compressor Verify that oil is in compressor housing and housing seal. refer to “Compressor Housing Outlet Defects” as listed earlier in this chart. Center Wall Deteriorated Excessive operating Check for restricted air intake. temperature. Check engine for overfueling. Check injection pump timing. CTM42 (24MAR95) 30-8 6076 Diesel Engines—S.N. (500000— ) RG,CTM8,G30,R3 -19-11SEP92 160101 PN=253