John Deere 400 6076 — John Deere 400 6076 User Manual

Air Intake And Exhaust System/Install Turbocharger PRELUBE TURBOCHARGER IMPORTANT: DO NOT spin the rotor assembly with compressed air. Damage to bearings can occur when using compressed air. Fill oil return (drain) port with clean engine oil and spin rotating assembly by hand to properly lubricate bearings. If turbocharger is to be stored for an extended period of time, lubricate internally and install protective covers on all openings. RG5858 -UN-13AUG91 RG,CTM42,G30,34-19-29OCT92 INSTALL TURBOCHARGER IMPORTANT: If turbocharger failed because of foreign material entering the air intake system, be sure to examine the system and clean as required to prevent a repeat failure.

RG5859 -UN-13AUG91 If not previously done, prime turbocharger lubrication system prior to mounting turbocharger on engine. Fill center housing with new engine oil through oil drain hole (as shown). Turn rotating assembly by hand to lubricate 6076A shown, 6076T similar bearings. 30 20 1. Apply a coat of grease to O-rings (A) and install on compressor housing outlet (C) and coupling (B). 2. Put a new gasket on turbocharger-to-exhaust manifold mounting surface (not shown). CTM42 (24MAR95) 30-20 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,G30,35-19-29OCT92 160101 PN=265