Air Intake And Exhaust System/Assemble and Install Horizontally-Mounted Aftercooler Assembly 7. Install three guide studs (A) in locations shown. IMPORTANT: All intake manifold connections must be tight to prevent loss of power resulting from lower manifold pressure, and possible engine damage. RG6490 -UN-26OCT92 8. Using new gaskets, install aftercooler assembly to cylinder head. Tighten cap screws to 47 N·m (35 lb-ft). 9. Connect coolant inlet and outlet hoses to aftercooler and tighten clamps. 10. Connect turbocharger oil inlet and return lines. RG,CTM42,G30,58-19-29OCT92 30 30 CTM42 (24MAR95) 30-30 6076 Diesel Engines—S.N. (500000— ) 160101 PN=275