John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System/Assemble Mechanical Fuel Supply Pump (Nippondenso) 7. Inspect pressure spindle (A) and plunger (B) for pits and burrs. Replace parts as necessary. 8. Inspect spring (C) for cracks and distortion. Replace parts as necessary. RG2322 -UN-30NOV88 S11,32010,QO -19-24NOV86 9. Inspect valves (A), especially valve face, for cracks, pits and wear. Replace as necessary. RG2323 -UN-30NOV88 10. Spring (B) should not be bent or broken. S11,3010,QP -19-24NOV86 ASSEMBLE MECHANICAL (ROLLER TAPPET) FUEL SUPPLY PUMP—NIPPONDENSO IMPORTANT: Always use new copper gaskets. Dip parts in clean diesel fuel before assembly.

Hands should be wet with diesel fuel when assembling internal components of fuel supply pump. RG2013 -UN-30NOV88 1. Install new spindle seal (C) into pump housing (B) using JDF15 Driver (A). Be sure seal is started straight in housing bore and drive until driver contacts housing. 2. To assemble supply pump, reverse disassembly procedure using new O-rings. Perform leak test described in Group 115. 35 15 CTM42 (24MAR95) 35-15 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,G35,12-19-14FEB95 160101 PN=292