Fuel System/Disassemble Mechanical Fuel Supply Pump (Robert Bosch) DISASSEMBLE MECHANICAL (FLAT PLUNGER) FUEL SUPPLY PUMP—ROBERT BOSCH 1. Remove inlet elbow fitting (A) and outlet elbow fitting (B) by loosening locknut and unscrewing fittings from pump housing. Remove and discard O-rings. 2. Remove hand primer (C) from housing. Remove and discard copper washer (D). A—Inlet Elbow Fitting B—Outlet Elbow Fitting C—Hand Primer Pump D—Copper Washer RG5909 -UN-19AUG91 RG,CTM42,G35,63-19-14FEB95 3. Remove fuel pump outlet valve fitting (A) from pump housing (C). Remove and discard O-ring (B). 4. Remove spindle (I) and spindle guide plug (H) by unscrewing guide plug from pump housing.
Remove and discard O-rings (J and G). RG5912 -UN-28AUG91 5. Remove plunger (F), spring wear plates (D), and spring (E). A—Outlet Valve Fitting B—O-Ring C—Supply Pump Housing D—Spring Wear Plates E—Spring F—Plunger Assembly G—O-Ring H—Spindle Guide Plug I—Spindle J—O-Ring 35 16 RG,CTM42,G35,64-19-28OCT92 CTM42 (24MAR95) 35-16 6076 Diesel Engines—S.N. (500000— ) 160101 PN=293