John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System/Install Rotary Fuel Injection Pump—Stanadyne DB4 8. Connect injection pump pressure lines (D). Beginning with outlet (A) and continue around pump head in counterclockwise direction, attaching lines in engine firing order. 9. Tighten pressure lines at pump to 27 N·m (20 lb-ft), using a suitable 17 mm wrench. IMPORTANT: When tightening fuel pressure lines at fuel injection pump, be sure not to turn fuel injection pump fittings. Turning fittings may cause internal pump damage. RG6466 -UN-26OCT92 10. Connect fuel supply line (B), leak-off line (C), shut-off cable and speed control rod. 11. Bleed air from fuel system as outlined in Group 115. A—Outlet Connection to No.

1 Cylinder B—Fuel Supply Line C—Fuel Leak-off Line 12. Remove timing pin from cylinder block. Tighten D—Fuel Pressure Lines injection lines to injection nozzles to 27 N·m (20 lb-ft). Hold injection nozzle holders during tightening. RG,CTM42,G35,90-19-14FEB95 35 36 CTM42 (24MAR95) 35-36 6076 Diesel Engines—S.N. (500000— ) 160101 PN=313