Fuel System/Perform Nozzle Leakage Test PERFORM NOZZLE LEAKAGE TEST RG5951 -UN-30AUG91 A—Gland Nut O-Ring D—Shim G—Intermediate Plate I—Nozzle B—Gland Nut E—Nozzle Valve Spring H—Nozzle Valve J—Nozzle Retaining Nut C—Nozzle Holder F—Spring Seat Nippondenso Nozzle (Bosch Similar) 1. Wipe nozzle dry. 3. Check for leakage around nozzle retaining nut (J) thread connection with nozzle holder (C). 2. Bring pressure up slowly to 1970 kPa (20 bar) (285 psi) below the opening pressure. Watch for an accumulation of fuel from spray orifice, indicating a bad seat. Leakage indicates a bad seat either between nozzle and intermediate plate (G) or between nozzle holder and intermediate plate.
If nozzle drips within 10 seconds, replace nozzle valve (H) and nozzle (I). RG,CTM42,G35,32-19-03OCT92 35 45 CTM42 (24MAR95) 35-45 6076 Diesel Engines—S.N. (500000— ) 160101 PN=322