Fuel System Operation and Test/Check and Adjust Engine Slow Idle Speed—In-Line Fuel Injection Pump CHECK AND ADJUST SLOW IDLE SPEED—IN-LINE FUEL INJECTION PUMP NOTE: Both the slow idle stop screw (A) and the bumper spring screw (B) may be used to adjust the slow idle speed. RG5942 -UN-23AUG91 RG5943 -UN-23AUG91 IMPORTANT: Minor adjustment of the slow idle speed may be made with the bumper spring screw. However, it should not be used by itself to change engine speed more than 50 rpm, as overspeeding of (Robert Bosch) the engine may result. 115 35 If slow idle stop screw and bumper spring screw are not adjusted according to instruction, engine damage could result because of overspeeding.
N CAUTION: ALWAYS STOP ENGINE before making adjustments. 1. With the engine running, pull the governor control lever rearward to the slow idle speed position. Check and adjust slow idle speed to specification. (Nippondenso) NOTE: For each application, refer to the appropriate machine technical manual for slow idle speed A—Slow Idle Stop Screw specifications. B—Bumper Spring Screw C—Lock Nut D—Lock Nut RG,CTM42,115,34-19-16AUG94 CTM42 (24MAR95) 115-35 6076 Diesel Engines—S.N. (500000— ) 160101 PN=418