John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System Operation and Test/Fuel Injection Nozzle Operation FUEL INJECTION NOZZLE OPERATION Fuel lines (A) deliver the fuel to injection nozzles. Fuel enters the injection nozzle inlet (B), and passes through the edge-type filter (C). Coarse foreign particles are retained by the filter. A passage (D) routes fuel through the nozzle holder to the nozzle valve (E). The nozzle valve is lifted instantly off its seat by the high pressure inlet fuel acting on an annulus in the valve. 115 47 NOTE: Since the nozzle valve opening pressure is considerably lower than the injection pump output pressure, the inlet fuel pressure easily overcomes the resistance of the nozzle valve spring (G).

When the nozzle valve opens, a definite quantity of fuel (determined by the injection pump output for each plunger stroke) is forced out through orifices (F). The fuel becomes finely atomized as it is sprayed into the combustion chamber at high velocity. The nozzle assembly is lubricated by a small amount of fuel which seeps between the lapped surfaces of the nozzle and valve which accumulates around the spring (G, refer to previous illustrations). RG4651 -UN-29AUG94 The leakage fuel is routed out the nozzle holder through a leak-off connector (H) and returned back to the fuel tank by means of a leak-off pipe (I).

Fuel Flow Through KDEL Injection Nozzle A—Fuel Delivery Line B—Fuel Inlet C—Edge-Type Filter D—Fuel Passage E—Nozzle Valve F—Orifices G—Nozzle Valve Spring H—Leak-Off Connector I—Leak-Off Pipe J—Engine Cylinder Head K—High Pressure Fuel L—Low Pressure (Return) Fuel S55,23010,P -19-16SEP94 CTM42 (24MAR95) 115-47 6076 Diesel Engines—S.N. (500000— ) 160101 PN=430