John Deere 400 6076 — John Deere 400 6076 User Manual

Fuel System Operation and Test/Diagnose Malfunctions—Fuel Injection Nozzle DIAGNOSE MALFUNCTIONS—FUEL INJECTION NOZZLE Fuel injection nozzles are usually removed from the engine when there is a noticeable loss of power or excessive smoking. Listed in the following chart are various malfunctions which may occur on the 21 mm nozzles. Only possible defects related to these nozzles are listed. Failures in other components of the fuel injection system are listed under their respective headings in this group. 115 48 See Group 35 for repair information.

Symptom Problem Solution Engine Has Low Horsepower Nozzle orifices plugged Repair (See Group 35) Incorrect nozzle valve opening Adjust (See Group 35) pressure Broken or damaged parts Repair as required (See Group 35) a. Broken nozzle valve spring b. Cracked or split nozzle tip c. Cracked or split nozzle body d. Internal leak Wrong nozzle and valve in holder Install correct nozzle assembly (See Group 35) Nozzle loose in cylinder head Make sure R84472 Steel Washer is installed on tip end of injection nozzle.

Tighten to specified torque (See Group 35) Engine Emits Too Much Smoke Nozzle orifices plugged Repair (See Group 35 Diesel Fuel System) Broken or damaged parts Repair as required (See Group 35) Diesel Fuel System a. Broken nozzle valve spring b. Cracked or split nozzle tip c. Cracked or split nozzle body d. Internal leak Wrong nozzle and valve in holder Install nozzle assembly (See Group 35 Diesel Fuel System) Worn nozzle valve seal Replace nozzle assembly (See Group 35 Diesel Fuel System) CTM42 (24MAR95) 115-48 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,115,23-19-28OCT92 160101 PN=431