Cylinder Head and Valves/Inspect and Clean Cylinder Head Nozzle Bore INSTALL VALVE SEAT INSERTS 1. Use the JDE7 Driver (A) along with the JDG605 Valve Seat Installer (B) to drive inserts into place. The larger end of JDG605 Installer is used to install intake valves and the smaller end is used to install exhaust valves. RG5249 -UN-06DEC88 2. Install new or refaced valves and check valve recess. (See MEASURE VALVE RECESS, earlier in this group.) 3. Grind valve seats as required to maintain correct valve recess and valve-to-seat seal. (See GRIND VALVE SEATS, earlier in this group.) S11,2005,MM -19-28OCT92 05 27 INSPECT AND CLEAN CYLINDER HEAD NOZZLE BORE 1.
Inspect condition of threads for gland nut. Threads are metric (M28 x 1.5). RG5251 -UN-14DEC88 2. Inspect condition of nozzle seating surface in cylinder head. Cylinder head threads and nozzle seating surface must be free of debris and carbon deposits. IMPORTANT: If the injection nozzle gland nut threads are not clean, a false torque reading may be obtained when the injection nozzle is installed. This may prevent the injection nozzle from seating properly in the cylinder head. 3. Clean threads which have light foreign deposits using a drill and the D17030BR Thread Cleaning Brush. Work brush up and down several times to clean threads.
RG,CTM42,G5,14 -19-08FEB94 CTM42 (24MAR95) 05-27 6076 Diesel Engines—S.N. (500000— ) 160101 PN=70