John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Head and Valves/Clean and Inspect Top Deck of Cylinder Block CLEAN AND INSPECT TOP DECK OF CYLINDER BLOCK 1. Remove gasket material, rust, carbon, and other foreign material from top deck. Gasket surface must be clean. RG5796 -UN-12AUG91 2. Use compressed air to remove all loose foreign material from cylinders and top deck. 3. Remove cylinder head locating dowels. 4. Clean all cylinder head mounting cap screw holes using JDG681A or an equivalent 9/16-12 UNC-2A tap about 114.3 mm (4.5 in.) long. Use compressed air to remove debris and any fluids which may be present in the cap screw holes. 5. Measure top deck flatness. See MEASURE CYLINDER BLOCK in Group 10. 05 29 6.

Install new cylinder head locating dowel pins in cylinder block. RG,CTM42,G5,17 -19-17MAR95 CTM42 (24MAR95) 05-29 6076 Diesel Engines—S.N. (500000— ) 160101 PN=72