John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Head and Valves/Assemble Valve Assembly ASSEMBLE VALVE ASSEMBLY 1. Apply AR44402 Valve Stem Lubricant or clean engine oil to valve stems and guides. NOTE: Exhaust valve stem shields will not seat on valve guide tower; they ride up and down with valve stem. RG3806 -UN-23FEB89 2. Install reconditioned or new valves (A) in head. If valves are reused, install in same location from which removed. NOTE: Valves must move freely and seat properly. S11,0401,AK -19-28OCT92 05 31 NOTE: There is no top or bottom to valve springs; they may be installed either way. 3. Position valve springs (B). End of spring must be in machined counterbore of head. Do not mix valve springs.

See INSPECT AND MEASURE VALVE SPRINGS, earlier in this group. RG3804 -UN-23FEB89 4. Install valve rotators (A) on springs and valves (C). 5. Install valve stem shields on exhaust valve stems. RG,CTM42,G5,28 -19-28OCT92 6. Compress valve springs with JDE138 Valve Spring Compressor (A) and install retainer locks (B). NOTE: Install wear caps just before installing rocker arm assembly. RG3803 -UN-23FEB89 RG,CTM42,G5,29 -19-28OCT92 CTM42 (24MAR95) 05-31 6076 Diesel Engines—S.N. (500000— ) 160101 PN=74