John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Head and Valves/Clean, Inspect and Install Cylinder Head Cap Screws TORQUE-TURN FLANGED-HEAD CAP SCREWS—GRADE 180 RG7136 -UN-21FEB94 Arrow (A) points toward front of engine. Using line scribe method to TORQUE-TURN cylinder head cap screws: IMPORTANT: DO NOT use multi-viscosity oils to lubricate cap screws. RG4471 -UN-28FEB94 RG7138 -UN-28FEB94 1. Lubricate cap screws with clean SAE30 engine oil and install in their proper locations as outlined previously. 2. Tighten cap screw No. 17 to 100 N·m (75 lb-ft) first. Tighten all remaining cap screws to 100 N·m (75 lb-ft), beginning with No. 1 and proceed sequentially. 3. Retighten all cap screws to 125 N·m (95 lb-ft) beginning with No. 1.

05 35 4. Make 90˚ reference marks (A,B) on socket. 5. Install socket on cap screw No. 1 and make a reference mark on cylinder head that aligns with reference mark (A) on socket. 6. Turn cap screw 90˚—100˚ until reference mark on cylinder head aligns with reference mark (B) on socket. 7. Repeat Steps 5 and 6 on all remaining cap screws. Using JT05993 Torque Angle Gauge: After lubricating and tightening cylinder head cap screws (in proper sequence) according to steps 1, 2, and 3 listed above, follow directions provided with gauge and TORQUE-TURN each cap screw 90˚—100˚, beginning with cap screw No. 1 and sequentially proceed thru to No. 26.

RG,CTM42,G5,36 -19-14FEB95 CTM42 (24MAR95) 05-35 6076 Diesel Engines—S.N. (500000— ) 160101 PN=78