7. When installing, screw in until the seal surface contacts the filter holder, then tighten 3/4 to 1 of a turn. After replacing the filter cartridge, add engine oil through oil filler 0 until the oil level is between the H and L marks on the dipstick. For details of the oil to use, see “20. USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE”. Run the engine at idling for a short time, then stop the en- gine, and check that the oil level is between the H and L marks on the dipstick. For details, see “24.3 CHECK BE- FORE STARTING”. 8. 9.
NOTICE Even if the machine has not been operated for 500 hours, the oil and filter cartridge must be replaced when the ma- chine has been operated for 6 months. In the same way, even if the machine has not been oper- ated for 6 months, the oil and filter cartridge must be re- placed when the machine has been operated for 500 hours. 3-48