Komatsu — 24.6 EVERY 1000 HOURS SERVICE

24. SERVICE PROCEDURE 7. Install the strainers to their original position. 8. After filter, filter. installing, replace the element in the transmission transmission lubricating filter and torque converter For details, see “24.4 EVERY 250 HOURS SERVICE”. 9. Refill the specified quantity of engine oil through oil filler 0. For details of the oil to use, see “20. USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE”. 10. Check that the oil is at the specified level. For details, see “24.3 CHECK BEFORE STARTING. 24.6.2 CHECK, CLEAN FUEL STRAINER 1. Tighten valve 0 and 0. 2. Remove cap 0, and take out the strainer. Clean the strainer and the strainer case.

The strainer is soldered on cap 0. 3. After instaling them, open valves 0 and 0. 24.6.3 CLEAN STEERING CLUTCH CASE BREATHER 1. 2. Open the rear floor cover. Remove breather 0 on steering clutch case, and wash out dust remaining inside with diesel fuel or flushing oil. 3-59