24. SERVICE PROCEDURE 24.6.6 REPLACE FILTER ELEMENT OF HYDRAULIC TANK BREATHER A WARNING The oil is at high temperature immediately after the ma- chine has been operated. Wait for the oil to cool down before changing the oil. When removing oil filler cap 0, turn it slowly to release the internal pressure, then remove it carefully. 1. Remove snap ring 0 of breather 0 and replace filter ele- ment @I with a new one. 2. Install cover 0 and snap ring 0. 24.6.7 CHECK ALL TIGHTENING PARTS OF TURBOCHARGER Contact your Komatsu distributor to have the tightening portions checked. 3-61