24. SERVICE PROCEDURE 24.7.3 CHANGE OIL IN DAMPER CASE, CLEAN BREATHER Prepare the following. l Container to catch drained oil: Min. 2 Q capacity l Refill capacity: 1.9 Q (0.5 US gal, 0.42 UK gal) 1. Remove breather 0 at the top of the damper. 2. Wash out dust remaining inside of breather with diesel oil and flushing oil. 3. Install breather 0 to the original position. 4. Open the inspection cover under the chassis. 5. Remove drain plug 8 slowly to avoid getting oil on your- self, and drain the oil. After draining the oil, tighten plug @. 6. Pull out dipstick 0, and add engine oil to the specified level through oil filler. For details of the oil to use, see “20.
USE OF FUEL, COOL- ANT AND LUBRICANTS ACCORDING TO AMBIENT TEM- PERATURE. 7. Check that the oil level is between the H and L marks on dip- stick 0. For details, see “24.3 CHECK BEFORE STARTING”. 8. Close the inspection cover. 3-65