Komatsu — TIRE PRESSURE

OPERATION Tire size (pattern) Ply rating Inflation pressure (kg cm?) Soft ground (sandy ground) Stockpile Digging Normal road When shipped from factory 15.5 - 25 (L-2 Traction) 8 1.8-3.0 2.0 - 3.5 2.5 - 3.5 3.0 12 17.5 - 25 ,.__ . . 0 For operations on normal road surfaces, rock digging operations: High end of range in air pressure chart. When checking the tire pressure, check also for small cracks and damage, and for wire or small pieces of metal which may cause punctures. Check also for abnormal wear. Stockpile operations on soft ground: Average pressure in air pressure chart.

* l * Operating costs can be reduced and tire life increased by keeping the operating area in good condition and free from fallen rocks. 0 Operations on sand (operations not using much digging force): Low end of range in air pressure chart. Deflection ratio (deflection/free height) * If the deflection of the tire is excessive, raise the H-h inflation pressure within the limits given in the = x 100 table to give a suitable deflection (see deflection H ratio). - * Stockpile operations mean and other loose materials. the loading of sand H: Free height h: Height when loaded AS a guide for visual checks, the deflection ratio (deflection/free height) of the front tire should be as follows.

Normal loading and carrying operations (lift arm horizontal): approx. 15-25% Digging operations (rear wheels off ground): approx. 25 - 35% h L15AFIO17 2-51