Komatsu — LUBRICATION WHEN SHIPPED

MAINTENANCE lubricate work equipment pins daily if they are submerged in water. l Clean electrical components, especially the cranking motor and alternator, to avoid accumulation of dust. Dusty worksites: When working at dusty worksites, do as follows: Avoid mixing oils: Never mix oils of different brands. If you have only oil which is a different brand from the one that is used in the machine, do not add it but replace all the oil. l Check the air cleaner for clogging more frequently. Clean the air cleaner at shorter intervals than specified. l Clean the radiator core frequently to avoid clogging. l Replace the fuel filter(s) frequently.

OUTLINES OF SERVICE LUBRICATION WHEN SHIPPED l Use genuine oils and grease. Choose oils and l Unless otherwise specified, the oils, grease, fuel grease with proper viscosities specified for the and coolant used at the time of shipment from the ambient temperature. factory are as shown in the table below. l When changing or adding oil, do not use a different type of oil.

COMPARTMENT LUBRICANT Engine Engine oil SAE 15W-40 API classification CE Torque converter, Transmission, Transfer case & Oil cooler Engine oil SAE 30W API classification CE Service brakes 1 Engine oil SAE 1OW API classification CE I Hydraulic system Engine oil SAE 1OW API classification CE Drive axles - Front & rear Axle oil - See NOTE Lubrication fittings No. 2 multi-purpose lithium grease with 3% molybde- num disulfide Fuel tank Diesel fuel ASTM D975 Grade No. 2-D I Cooling system Coolant mixture of water, antifreeze, 8 supplemental coolant additives NOTE: For axle oil, one of the following oils was used:

DONAX TT or TD RPM TRACTOR HYDRAULIC FLUID TRACTOR HYDRAULIC FLUID TDH OIL MOBIL AND SUPER UNIVERSAL SHELL: CALTEX: CHEVRON: TEXACO: MOBIL: 3-3