Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

1.19 PISTON, PISTON RING, AND CONNECTING ROD 6. Remove and inspect the oil spray nozzles. See Figure 1-99. Refer to section 3.3.1. Replace them if damaged. 1. Oil Spray Nozzle 2. Cylinder Liner Figure 1-99 Location of Oil Spray Nozzle 7. Remove the connecting rod stretch bolts and bearing cap. See Figure 1-100. Figure 1-100 Bearing Caps NOTE: If the bearing shell halves are removed from the rods and caps, be sure to mark them so they can be matched for installation. 8. Remove the bearing shell halves from the bearing cap and connecting rod. All information subject to change without notice. 1-114 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION