Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

1.19 PISTON, PISTON RING, AND CONNECTING ROD 9. Install sleeve(J-47710) to the cylinder block. See Figure 1-113. Figure 1-113 Piston NOTE: If the replacement piston has a locating arrow, it must point toward the front of the engine. 10. Push the piston and connecting rod into cylinder liner. 11. Remove sleeve (J-47110) and wipe the carbon scraper ring seat clean. See Figure 1-114. 1. Cylinder Liner 3. Installed Piston 2. Carbon Scraper Ring 4. Installed Carbon Scraper Ring Figure 1-114 Carbon Scraper Ring All information subject to change without notice. 1-128 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION