Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

1.20 VALVES 2. Set up a dial gauge and dial gauge holder with a preload on the lower contact surface of the cylinder head. See Figure 1-126. 1. Lower Contact Surface of Cylinder Head 3. Dial Gauge 2. Valve Head 4. Dial Gauge Holder Figure 1-126 Setting the Dial Gauge Preload NOTE: Before doing this procedure, make sure the valve head is making contact with the valve seat. All information subject to change without notice. 1-142 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION