1.22 CAMSHAFT AND GEAR ASSEMBLY 1.22 CAMSHAFT AND GEAR ASSEMBLY The camshaft is made of induction-hardened steel and has seven main bearings. Each cylinder has lobes for intake and exhaust valves and a unit pump. The camshaft and gear is serviced as an assembly. In the engine, there is a possibility of installing the camshaft bushings in an inverted (wrong) position. NOTICE: If the camshaft bushings are installed in an inverted (wrong) channel position, there is potential for engine damage due to lack of lubrication. The holes in the camshaft journal must be lined up with the holes in the camshaft bushing. 1.
Bushing Groove Figure 1-139 Camshaft Bushing All information subject to change without notice. 1-158 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION