Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

1.22 CAMSHAFT AND GEAR ASSEMBLY 8. Remove the air conditioning compressor, alternator, and mounting bracket. Refer to section 9.2.1. 9. Remove the mounting bolts attaching the camshaft front cover to the cylinder block. See Figure 1-140. 10. Remove the bolts securing the fuel pump drive gear to the front of the camshaft. Discard the bolts. See Figure 1-140. 1. Fuel Pump Drive Gear 5. Camshaft Cover Gasket 2. Drive Gear Mounting Bolt 6. Front of Camshaft 3. Cover Mounting Bolt 7. Fuel Pump Driven Gear 4. Front Camshaft Cover Figure 1-140 Camshaft Assembly 11. Remove all rocker arm assemblies and pushrods. Refer to section 1.21.1. 12. Turn the engine on the stand until it is upside down. 13.

Remove the oil pan. Refer to section 3.2.1. 14. Remove the flywheel housing. Refer to section 1.18.1. All information subject to change without notice. 1-160 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION