EPA07 MBE 4000 SERVICE MANUAL 15. Attach the camshaft pilot disc (J–46183–1, part of toolset J–46183) finger tight to the front of the camshaft. See Figure 1-141. NOTE: Leave pilot disc attaching bolts finger tight in order to adjust guide sleeve during removal procedure. 1. Front of Camshaft Figure 1-141 Camshaft Guide Tool 16. Thread the guide sleeve (J–41580–1, part of toolset J–46183) onto the pilot disc. 17. Lubricate the guide sleeve with a light coat of clean engine oil. NOTICE: Do not damage the camshaft bearings in the crankcase. If the camshaft bearings are damaged, the bearings will have to be replaced. 18.
Using clean shop towels or gloves and from the gear end (rear of the engine), carefully remove the camshaft and gear assembly from the block. See Figure 1-141. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-161