Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL [c] Rotate the camshaft and gear assembly until the marked gear teeth on the camshaft gear are aligned with the marked tooth on the crankshaft gear. See Figure 1-144. 1. Camshaft Gear 2. Crankshaft Gear Figure 1-144 Aligning the Marked Gear Teeth [d] Lubricate the cam lobes, camshaft journals and guide sleeve with a light coating of clean engine oil. NOTICE: Do not damage the camshaft bearings in the crankcase. If the camshaft bearings are damaged, the crankcase will have to be replaced. [e] Using clean shop towels or gloves and from the gear end (rear of the engine), carefully insert the sleeve and guide the camshaft and gear assembly into the block.

All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-165