EPA07 MBE 4000 SERVICE MANUAL Table 1-84 Inside Diameter of Valve Guide Table 1-85 Spring Specifications, Intake and Exhaust Valves Table 1-86 Valve Lift Specifications Table 1-87 Valve Lash Adjustment Table 1-88 Valve Seat Specifications All information subject to change without notice.
DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-179 Description mm (in.) Normal 9.000-9.022 (0.3543-0.3552) Wear Limit 9.050 (0.3563) Description mm (in.) Length, Without Load 69.7 (2.74) Length, Under Load of 382-418 N·m (86-94 lb·ft) 49 (1.9) Length, Under Load of 644-706 N·m (145-159 lb·ft) 37 (1.5) Diameter of Spring Wire 4.2 (0.17) Outside Diameter of Spring Coil 28.9 (1.14) Inside Diameter of Spring Coil 24.5-24.9 (0.96-0.98) Description Specification mm (in.) Specified Dial Gauge Preload for Checking Valve Lift 15 (0.60) Valve Lift with Intake Valves Completely Open 11.546 (at least 0.4546) Valve Lift with Exhaust Valves Completely Open 11.963 (at least 0.4710) Valve Type Adjust to:
mm (in.) Intake 0.40 (0.016) Exhaust 0.60 (0.024) Description Intake Valve, mm (in.) Exhaust Valve-EGR, mm (in.) Valve seat angle (E) 30 Degree 36 Degree Valve seat surface diameter (G) 41.99-42.01(1.65-1.654 38.99-39.01(1.535-1.536) Relative position (H) to diameter G 4.00-4.15 (0.157-0.163) 4.00-4.15 (0.157-0.163)