Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

Rocker Arm The rocker arm mounting bolt specifications are listed in Table 1-89. Listed in Table 1-90 are the rocker arm specifications. Listed in Table 1-91 are the rocker arm bushing specifications. Table 1-89 Specifications, Rocker Arm Mounting Bolts Table 1-90 Rocker Arm Specifications Table 1-91 Rocker Arm Bushing Specifications All information subject to change without notice. 1-180 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION Size Max.

Shaft Length mm (in.) Torque N·m (b·ft) M12 91 (3.6) 60 (44) additional 90° Description Stage Specification mm (in.) Outside Diameter of Valve Tappets Normal 29.931-29.952 (1.1784-1.1792) Outside Diameter of Valve Tappets Repair Stage I 30.444-30.465 (1.1986-1.1994) Diameter of Tappet Seats (in cylinder block) Normal 30.000-30.021 (1.1811-1.1819) Diameter of Tappet Seats (in cylinder block) Repair Stage I 30.500-30.525 (1.2008-1.2018) Total Length of Pushrods 345.0-346.5 (13.58-13.64) Maximum Pushrod Warpage 0.5 (0.02) Maximum Length of Rocker Arm Mounting Bolts 91 (3.6) Description Specification, mm (in.) Bushing Inside Diameter (when installed) 25.005-25.021 (0.9844-0.9851) Shaft Diameter 24.967-24.980 (0.9830-0.9835)