Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 4. Install the fuel injector in the cylinder head and align the hole in the side of the fuel injector to face the transfer-tube. See Figure 2-27. 1. High Pressure Fuel Line Fitting 8. Tensioning Arm 2. Thrust Bolt 9. CTV Spacer 3. O-ring (transfer-tube) 10. Constant Throttle Valve (CTV) 4. Transfer-Tube 11. O-ring (protective sleeve) 5. Fuel Injector 12. Protective Sleeve 6. Tensioning Arm Bolt 13. Injector Heat Isolator 7. O-ring (fuel injector) Figure 2-27 Fuel Injector 5. Install the tensioning arm bolt in the tensioning arm. Torque the bolt to 50 N·m (37 lb·ft). All information subject to change without notice.

DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-39