2.12 FUEL HAND PRIMER PUMP 1. If removed, attach the fuel primer mounting bracket to the air mixer housing and secure with three bolts. Torque the bolts to 25 N·m (18 lb·ft). 2. Secure the fuel primer to the mounting bracket with two bolts. Torque the bolts to 25 N·m (18 lb·ft). 3. Install the fuel inlet line to the fuel primer. 4. Attaching the fuel outlet line to bottom of fuel primer and secure with banjo bolt. Torque the banjo bolt to 50 N·m (37 lb·ft). All information subject to change without notice. 2-56 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION