Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 2.13 FUEL PUMP The following sections support the fuel pump. 2.13.1 Removal of Fuel Pump Removal steps are as follows: FIRE To avoid injury from fire, keep all potential ignition sources away from diesel fuel, including open flames, sparks, and electrical resistance heating elements. Do not smoke when refueling. 1. Disconnect the batteries. PERSONAL INJURY To avoid injury from the sudden release of a high-pressure hose connection, wear a face shield or goggles. 2. Remove the fuel lines from the fuel pump by removing the banjo bolts and washers. Discard the seal rings on the banjo fitting. See Figure 2-36. 1. Fuel Pump 2. Banjo Fittings 3.

Banjo (Hollow-Core) Bolt Figure 2-36 Fuel Lines at the Fuel Pump All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-57