Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 2.15 FUEL DOSER VALVE (FDV) The following sections support the fuel doser valve. 2.15.1 Removal of Fuel Doser Injector Valve The Fuel Doser Injector Valve is mounted in the exhaust pipe that is mounted to the turbocharger. Fuel injected from the valve will atomize with the exhaust gas and combust across the Diesel Oxidation Catalyst (DOC) to create the heat required to regenerate the Diesel Particulate Filter (DPF). 1. Exhaust Pipe 7. Banjo Bolts 2. Fuel Doser Supply Line 8. Washers 4. Seal 10. Torx Head Screws (qty 3) 3. Lower Fuel Doser Valve Spray Shield and Drain 9. Bolts 5. Fuel Doser Injector Valve 11. Upper Fuel Doser Valve Spray Shield 6.

Fuel Doser Housing Figure 2-42 Fuel Doser Valve and Related Components Removal steps are as follows: 1. Remove the protection cover for the fuel doser injector valve, if equipped. 2. Remove the bracket securing the fuel doser supply line to the block. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 2-63