2.15 FUEL DOSER VALVE (FDV) 2.15.5 Removal of Dosing Fuel Line Removal steps are as follows: 1. Bolt and Nut 6. Bolts (qty 3) 2. Bolts 7. Bolt 3. Lower Dosing Fuel Line to Doser Block Assembly 8. Bolts 4. Upper Dosing Fuel Line to FDV 9. Fitting Connection 5. Upper Cover Figure 2-43 Dosing Fuel Line 1. Remove the three bolts securing the upper cover on the Fuel Dosing Valve (FDV) and remove the cover. See Figure 2-43. All information subject to change without notice. 2-66 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION