Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

3.3 PISTON OIL SPRAY NOZZLE hole in the bottom of the piston. See Figure 3-7. Torque the hollow-core bolt to 40 N·m (30 lb·ft). 1. Pin Seat 2. Locator Pin Figure 3-7 Piston Oil Spray Nozzle(s) NOTE: The locator pin on the base of the piston oil spray nozzle must be inserted into the pin seat in the cylinder block until it engages. Figure 3-8 Spray Nozzle Alignment with Piston Oil Hole NOTICE: It is critical that the oil spray nozzle(s) are aligned and in center of the oil hole in the bottom of the piston. Improper alignment of nozzle and piston oil hole will result in engine failure. 2.

Check to ensure that the piston oil spray nozzle(s) are aligned with the center of the oil hole in the base of the piston as follows: All information subject to change without notice. 3-10 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION