3.7 OIL COOLER/FILTER HOUSING 8. Remove the oil cooler element from the oil cooler/filter housing. Discard the gaskets and save the cooler bolts for later installation. See Figure 3-22. 1. Gasket 3. Oil Cooler Bolt 2. Oil Cooler/Filter Housing 4. Oil Cooler Element Figure 3-22 Oil Heat Exchanger Assembly 9. Remove the oil pressure/temperature sensor from the oil cooler/filter housing. Refer to Section 3.8.1. All information subject to change without notice. 3-26 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION