Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

4.3 FRONT IDLER AND TENSIONER SUPPORT 4.3 FRONT IDLER AND TENSIONER SUPPORT Perform the following procedures for removal and installation of the front idler and tensioner support. 4.3.1 Removal of Front Idler and Tensioner Support Removal steps are as follows: 1. Disconnect the batteries. 2. Release the tension on the main drive belt and fan belt. Set the belts aside. 3. Remove the belt tensioner from the front of the engine. 4.3.2 Installation of Front Idler and Tensioner Support Installation steps are as follows: 1. Install the front idler on to the cylinder block. Tighten the mounting bolts to 60 N·m (44 lb·ft). 2.

Release the tension on the main belt tensioner and install the main drive belt. Release the tension on the fan belt tensioner and install the fan belt. 3. Connect the batteries. All information subject to change without notice. 4-18 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION