EPA07 MBE 4000 SERVICE MANUAL 7. Remove the bolt, spacer and two isolators securing the support bracket to the alternator bracket. See Figure 6-5. 1. Air Intake Manifold 7. Gasket 2. Gasket 8. Intake Air Throttle Valve 3. Air Temperature / Pressure Sensor 9. Coolant Feed Line (w/EC2) 4. Gas Mixer Housing 10. EGR Gas Outlet Pipe 5. Air Inlet Elbow 11. Gasket 6. Studs & Nuts (4 qty.) 12. Coolant Return Line (w/EC2) Figure 6-5 Gas Mixer Housing 8. Remove four locking nuts securing the gasket and air intake elbow to the gas mixer housing. Remove the elbow, throttle valve and adaptor as an assembly. Discard the gasket. See Figure 6-5. All information subject to change without notice.
DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 6-11