Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

6.5 ELECTROSTATIC OIL SEPARATOR, CRANKCASE SEPARATOR, AND OIL SEPARATOR DRAIN LINE 6.5 ELECTROSTATIC OIL SEPARATOR, CRANKCASE SEPARATOR, AND OIL SEPARATOR DRAIN LINE Removal the Electrostatic Oil Separator as follows: 6.5.1 Removal of Electrostatic Oil Separator Removal steps are as follows: NOTE: The electrostatic oil separator is housed inside the air intake manifold. 1. Air Intake Manifold 3. Electrical Connection 2. Screws (qty 2) 4. Electrostatic Oil Separator Figure 6-7 Electrostatic Oil Separator 1. Remove the rear trim cover and disconnect the electrical connector to the Electrostatic Oil Separator. See Figure 6-7. 2.

Disconnect the crankcase breather pipe from the electrostatic oil separator by compressing the band at the connection and pulling outward. All information subject to change without notice. 6-16 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION