7.1 EXHAUST MANIFOLD ASSEMBLY NOTICE: To ensure proper installation of the exhaust manifold assembly and to avoid exhaust gas leaks during engine operation, new exhaust manifold gaskets must be installed. 1. Install the exhaust manifold gaskets to cylinder heads and secure using the lower exhaust manifold bolts. See Figure 7-6. 1. Exhaust Manifold Gaskets (qty 3) 6. V-Band Clamps 2. Exhaust Manifold End Pieces (qty 2) 7. Adaptor 3. Exhaust Manifold Center Piece (engine brake installed) 8. Bolts (qty 12) 4. Bellows 9. Spacers (qty 12) 5. Sleeves Figure 7-6 Exhaust Manifold Assembly NOTE: Ensure that only one quarter of the bolt threads are threaded inside the cylinder heads.
During installation, the exhaust manifold bolts will act as guide studs to support the exhaust manifold assembly. 2. Install the EGR cooler support bracket. Torque bolts to 50 N·m (37 lb·ft). All information subject to change without notice. 7-8 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION