EPA07 MBE 4000 SERVICE MANUAL 7.2 BRAKE GATE Engine braking is controlled by a pneumatically-operated exhaust brake gate located in the center exhaust manifold and by a hydraulic constant throttle valve system. 7.2.1 Removal of Brake Gate Actuator Cylinder and Bracket Removal steps are as follows: 1. Disconnect the batteries. PERSONAL INJURY To avoid injury before starting and running the engine, ensure the vehicle is parked on a level surface, parking brake is set, and the wheels are blocked. 2. Chock the rear tires and tilt the hood. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 7-11