Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

7.2 BRAKE GATE 3. To gain access to the exhaust brake gate, remove the air cleaner. 1. Bolts 5. Bracket Mounting Nuts 9. Nut 2. Bolt 6. Actuator Bracket 10. Brake Gate Actuator Cylinder 3. Washers 7. Bracket Mounting Bolts 11. Lever 4. Spring 8. Actuator Air Line Figure 7-9 Brake Gate Actuator Cylinder and Bracket 4. Remove the brake gate actuator cylinder and bracket as an assembly as follows: [a] Disconnect the air supply line to the brake gate. See Figure 7-9. [b] Remove the retaining clip connecting the ball socket to the actuator cylinder. Pry the ball socket from the ball fitting. [c] Disconnect the lever at the exhaust brake gate by removing the bolt and nut. See Figure 7-9.

All information subject to change without notice. 7-12 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION