Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

7.2 BRAKE GATE 1. Install a spring and washer onto the brake gate shaft. See Figure 7-11. 1. Bolts 5. Bracket Mounting Nuts 9. Nut 2. Bolt 6. Actuator Bracket 10. Brake Gate Actuator Cylinder 3. Washers 7. Bracket Mounting Bolts 11. Lever 4. Spring 8. Actuator Air Line Figure 7-11 Brake Gate Actuator Cylinder and Bracket 2. Install the bracket assembly onto the shaft and secure the bracket with two bolts. Torque the bolts to 25 N·m (18 lb·ft). 3. Install the actuator bracket to the EGR cooler and secure using two bolts and bracket mounting nuts. Torque the bolts to 25 N·m (18 lb·ft). All information subject to change without notice.

7-14 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION