EPA07 MBE 4000 SERVICE MANUAL 7.2.5 Removal of Brake Gate Removal steps are as follows: 1. Remove the brake gate actuator cylinder and bracket. Refer to section 7.2.1. 2. Remove the turbocharger. Refer to section 6.7.2. 3. Remove the brake gate assembly from the center exhaust manifold by using a drift and hammer on the ears of the brake gate cover plate and tap alternating from side to side (see arrows in figure). See Figure 7-14. 1. Brake Gate Assembly 2. Exhaust Manifold Center Section Figure 7-14 Brake Gate All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 7-17