Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

7.2 BRAKE GATE NOTICE: To avoid roll pin damage, slowly remove the brake gate assembly during disassembly. 4. Remove the brake gate assembly and the roll pins from the plate. See Figure 7-15. NOTE: Some brake gates were built with a two roll pin design. 1. Roll Pins 3. Bearings 2. Shaft 4. Housing Plate Figure 7-15 Brake Gate Assembly All information subject to change without notice. 7-18 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION