Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL NOTICE: Head and gasket must be seated properly, or engine damage could result. 3. Using a dial caliper, measure the length of the cylinder head bolts from the end of the bolt to the bottom of the flange. See Figure 1-11. Listed in Table 1-4 are the acceptable lengths. Replace any bolts which do not meet these specifications. 1. Dial Caliper 3. Bottom of Flange 2. End of Cylinder Head Bolt Figure 1-11 Measuring Head Bolts Table 1-4 Cylinder Head Bolt Lengths 4. Lubricate the cylinder head bolts with engine oil. All information subject to change without notice.

DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 1-17 Description Length mm (in.) Shaft length when new 210.0 (8.27) Maximum shaft length 212.0 (8.35)