Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 1. If removed, install rear mounting bracket. See Figure 8-2. NOTE: Do not torque bolt. 1. Bolts 9. Insert 2. Rear Mounting Bracket 10. EGR Gas Inlet Pipe from Exhaust Manifold 4. EGR Gas Inlet Pipe to EGR Cooler 12. Flanged Nut * 3. Clamp 11. Clamp 5. Seal 13. Bolt 6. Flanged Nut * 14. Bolt 7. Clamp Halves 15. Bracket 8. Bolts 16. Bolt * Use high temperature resistant hardware only Figure 8-2 EGR Gas Inlet Pipe and Related Components 2. If removed, install exhaust mounting bracket. See Figure 8-2 NOTE: Do not torque bolts. 3. Install EGR gas inlet pipe to the EGR cooler and secure using clamp halves, bolts, and flanged nuts. See Figure 8-2. NOTE:

Do not torque bolts. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 8-5