EPA07 MBE 4000 SERVICE MANUAL 8.2 EGR COOLER GAS OUTLET PIPE The following sections cover the removal and installation of the EGR gas outlet pipe. 8.2.1 Removal of EGR Cooler Gas Outlet Pipe Removal steps are as follows: 1. Gasket 5. Connector Pipe 2. Bolts (qty 2) 6. EGR Valve 3. EGR Cooler Gas Outlet Pipe 7. Bolts (qty 2) 4. Bolt (qty 2) Figure 8-3 EGR Cooler Gas Outlet Pipe 1. Remove two bolts mounting the EGR gas outlet pipe to the gas mixer housing. See Figure 8-3. 2. Remove two bolts (M8 x 16mm) attaching the mounting bracket on the EGR gas outlet pipe to the air intake manifold and move the pipe away from mixer housing. See Figure 8-3. NOTE:
Visually inspect the pipe for damage and replace if necessary All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 8-7