Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

9.1 DRIVE BELTS 1. Fit the fan drive poly-vee belt on the belt pulleys. Be careful not to kink, stretch, or otherwise damage the belt. For correct routing, see Figure 9-5. Do not fit the belt onto the tensioner pulley yet. 1. Tensioner Pulley 5. Fan Poly-Vee Belt 3. Fan Pulley 6. Crankshaft Pulley Figure 9-5 Fan Poly-Vee Belt Routing 2. Using a socket wrench (rotate the tensioner pulley clockwise) to remove the tension from the tensioner on the fan belt. See Figure 9-1. 3. Make sure the belt is correctly positioned for the tensioner pulley. 4. Restore the tension on the belt. [a] Release the tension on the socket wrench to return the tensioner pulley to its original position.

[b] Remove the socket-wrench bit from the pulley bolt. 5. Check the fan belt to make sure it is in the correct position and properly aligned on the pulleys. 6. Connect the batteries. All information subject to change without notice. 9-8 DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION