Detroit Diesel — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\compdisp049\compdisp

EPA07 MBE 4000 SERVICE MANUAL 9.1.5 Removal of Belt Tensioner Removal steps are as follows: NOTE: This procedure works for all belt tensioners. See Figure 9-6 to identify the correct belt tensioner. 1. Main Drive Belt Tensioner 4. Mounting Pad 2. Fan Belt Tensioner 5. Socket-Head Mounting Bolt 3. A/C Compressor Belt Tensioner Figure 9-6 Belt Tensioners PERSONAL INJURY To avoid injury to hands and fingers from the spring-loaded auto belt tensioner violently snapping back, do not cut the belt to remove it. 1. Release the tension on the main drive belt (alternator, and AC compressor) and move belt away from tensioner. 2. Release the tensioner. 3.

Remove the mounting bolt that fastens the belt tensioner and tensioner pulley to the cylinder block. All information subject to change without notice. DDC-SVC-MAN-0026 Copyright © 2011 DETROIT DIESEL CORPORATION 9-9